calculation

Wallpaper Calculator: How Many Rolls Do I Need?

Find out how many rolls of wallpaper to buy for a feature wall or a whole room. This calculator uses the drop method that paperhangers use: it works out how many full-height drops each wall needs, how long each drop must be once the pattern repeat is matched, and how many drops you can cut from each roll. It’s more reliable than dividing the wall area by the roll area.

Wallpaper calculator (drop method)

Add each wall you are papering. The calculator works out how many drops (strips) each wall needs, the cut length for your pattern repeat, how many drops you get from each roll, and the rolls to order.

Roll and pattern settings

Drops = (wall width − full-height openings) ÷ roll width, rounded up. Cut length = wall height + trim, rounded up to whole pattern repeats (plus half a repeat for a half-drop match). Drops per roll = roll length ÷ cut length, rounded down. Small openings such as windows are not deducted, because the offcuts are rarely usable. Order every roll from the same batch number. A standard Australian roll is 10.05 m × 0.53 m.

Fitting out a whole home, office or hotel floor?

Measure Manage measures wall finishes, including wallpaper, paint and tiling, from your drawings and gives you quantities you can order and price with confidence. Call Alastair on 0498 202 445 for a professional take-off.

Or get all four Pro calculators for A$119

How to measure for wallpaper

  1. Measure the width of each wall in metres.
  2. Measure the height from skirting to ceiling at the highest point.
  3. For wide openings such as a large window or a built-in robe, enter the width you won’t paper so fewer drops are counted.
  4. Find the roll width, roll length and pattern repeat on the label. A standard roll is about 0.53 m × 10.05 m.

How the calculation works

  • Drops per wall = wall width ÷ roll width, rounded up.
  • Cut length = wall height + trimming allowance, rounded up to a whole number of pattern repeats. Half-drop patterns add another half repeat.
  • Drops per roll = roll length ÷ cut length, rounded down.
  • Rolls = total drops ÷ drops per roll, rounded up, plus your wastage and spare rolls.

Wallpaper tips

  • Buy every roll from the same batch number, as colours vary between batches.
  • Keep at least one spare roll for repairs.
  • Large repeats and half-drop patterns waste more paper, so check the repeat before you choose.
  • Walls should be clean, sound and sealed before papering.

Frequently asked questions

How many rolls of wallpaper do I need for a feature wall?

A 2.65 m wide wall, 2.4 m high, with a standard 0.53 × 10.05 m roll and a 0.53 m straight repeat needs 5 drops of 2.65 m. That’s 3 drops per roll, so 2 rolls, plus a spare.

Should I deduct doors and windows?

Only for wide openings. Narrow doors and windows still need cut pieces above and below, so most installers don’t deduct them.

Fitting out a whole home or commercial floor? Measure Manage measures wall finishes from your drawings. Call 0498 202 445 or see our material take-off services.